Labor Protection Gloves Safety and Protection Application Specifications back
2025-06-24
Labor protection gloves are fundamental protective equipment in industrial production. According to data from the Emergency Management Department in 2023, hand injuries account for 17% of total work-related accidents, and gloves that meet national standards can reduce accident risks by more than 50%.
Technical Specifications for Protective Performance
Based on GB 7544 standard:
1. Mechanical Protection Requirements
Cutting resistance levels 1-3 (Level 1 withstands a load of 2 Newtons)
Abrasion test ≥ 2500 revolutions (EN 388 standard)
2. Chemical Protection Indicators
Water pressure resistance ≥ 30 minutes (ISO 13994)
Oil penetration time ≥ 30 minutes (GB 12624)
3. Thermal Protection Parameters
Electric welding gloves resistant to 1200°C molten beads (EN 12477)
High-temperature model working temperature limit value 250°C (ASTM F1060)
Material Characteristics Application Guidelines
Natural latex: elongation rate ≥ 800% (Quality inspection report)
Nitrile material: oil resistance higher than basic products (chemical testing data)
High-strength fiber: tensile strength ≥ 700MPa (GB 8965)
Standard Maintenance Requirements
1. Replacement Cycle Description
Ordinary latex gloves are recommended to be replaced after 60 working hours
Special fiber gloves are recommended not to exceed 80 working hours of use
2. Special Industry Requirements
Food processing gloves comply with GB 4806 standard
Cleanroom certified by ISO 14644
Inspection and Verification Process
1. Check LA safety mark (certification number XK-XX-XXXX)
2. Confirm the cutting protection level in the test report
3. Check the seam tensile strength (national standard requires ≥ 50 Newtons)
Technical Specifications for Protective Performance
Based on GB 7544 standard:
1. Mechanical Protection Requirements
Cutting resistance levels 1-3 (Level 1 withstands a load of 2 Newtons)
Abrasion test ≥ 2500 revolutions (EN 388 standard)
2. Chemical Protection Indicators
Water pressure resistance ≥ 30 minutes (ISO 13994)
Oil penetration time ≥ 30 minutes (GB 12624)
3. Thermal Protection Parameters
Electric welding gloves resistant to 1200°C molten beads (EN 12477)
High-temperature model working temperature limit value 250°C (ASTM F1060)
Material Characteristics Application Guidelines
Natural latex: elongation rate ≥ 800% (Quality inspection report)
Nitrile material: oil resistance higher than basic products (chemical testing data)
High-strength fiber: tensile strength ≥ 700MPa (GB 8965)
Standard Maintenance Requirements
1. Replacement Cycle Description
Ordinary latex gloves are recommended to be replaced after 60 working hours
Special fiber gloves are recommended not to exceed 80 working hours of use
2. Special Industry Requirements
Food processing gloves comply with GB 4806 standard
Cleanroom certified by ISO 14644
Inspection and Verification Process
1. Check LA safety mark (certification number XK-XX-XXXX)
2. Confirm the cutting protection level in the test report
3. Check the seam tensile strength (national standard requires ≥ 50 Newtons)
Address：Full floor, 37 / F, wantaili Plaza, 15 Chuangye street, Kwun Tong, Kowloon, Hong Kong
TEL:852-23418368 FAX:852-27636139
Adress：Jiahong building, No. 1, Chifeng Road, Jinlong street, Licheng District, Quanzhou City, Fujian Province
TEL:86-595-22459188 FAX:86-595-22457958
copyright © 2022 Fujian Quanzhou Jianhong Safety Protector Co., Ltd Record No：閩ICP備2022001452號-1
technical support：Xiamen yiertong Network Technology Co., Ltd
technical support：Xiamen yiertong Network Technology Co., Ltd
